Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issues with Router 2600XL Series

Pls I have a little issue with 2600XL router. I just upgraded the IOS image from c2600-ipbase-mz.123-6f to c2600-ipbasek9-mz.124-12.Upon reloading, it failed to boot properly. I quickly reloaded the initial image and then restarted it, the problem persisted. Right now, it keeps booting into the rommon mode and fails to boot properly. Please how can I resolve this, as I need to use the router soon.

Thanks.

1 REPLY

Re: Issues with Router 2600XL Series

The router is probably booting from rommon mode because it mayn't have a valid IOS image or config register setting may be incorrect. See if you can recover the router using the directions stated in the following link.

http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094a0b.shtml

Good Luck!!

HTH

Sundar

176
Views
0
Helpful
1
Replies