As it is not practicle feasible migrate all system of one VLAN to jumbo at ones, how can we ensure the jumbo activated systems still work correctly with other system on the same Vlan using standard MTU?
If a frame gets forwared from an interface that supports jumbo frames to an interface on the same switch in the VLAN that does not support jumbo frames the switch drops the frame the frame becasue it can send only frames of the allowed size out of the egres interface. So make sure that all interfaces that are communicating within a VLAN have jumbo frame support enabled.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...