05-21-2010 04:01 AM - edited 03-06-2019 11:12 AM
Hi,
Is it possible to do link aggregation after enabling jumbo frame.
Thanks
Mudassir
Solved! Go to Solution.
05-21-2010 04:11 AM
Hi,
Is it possible to do link aggregation after enabling jumbo frame.
Thanks
Mudassir
Hi Mudassir,
Jumbo frames can be enabled on interfaces configured for port-channel protocols. The following are some of the guidelines or restrictions:
* All the ports in a port-channel must have the same MTU.
* Changing the MTU of a port-channel interface changes the MTU of all member ports.
* If the MTU of a member port cannot be changed to the new value due to the member port being the blocking port, the port-channel is suspended . * A port cannot join a port-channel if it has a different MTU than the others in the existing port-channel.
* If an individual member port's MTU is changed, the port is suspended.
Check out the below link for more information
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
05-21-2010 04:11 AM
Hi,
Is it possible to do link aggregation after enabling jumbo frame.
Thanks
Mudassir
Hi Mudassir,
Jumbo frames can be enabled on interfaces configured for port-channel protocols. The following are some of the guidelines or restrictions:
* All the ports in a port-channel must have the same MTU.
* Changing the MTU of a port-channel interface changes the MTU of all member ports.
* If the MTU of a member port cannot be changed to the new value due to the member port being the blocking port, the port-channel is suspended . * A port cannot join a port-channel if it has a different MTU than the others in the existing port-channel.
* If an individual member port's MTU is changed, the port is suspended.
Check out the below link for more information
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide