10-18-2006 04:25 AM - edited 03-05-2019 12:19 PM
please let us know whether WS-X6548-GE-TX suports JUMBO FRAME on cisco 6509 switch
Cisco Internetwork Operating System Software
IOS (tm) MSFC3 Software (C6MSFC3-PSV-M), Version 12.2(17a)SX1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok
Regards,
Moorthy.
10-18-2006 05:33 AM
No, it doesn't...
//Mikhail Galiulin
10-18-2006 08:50 PM
Hi Moorthy,
WS-X6548-GE-TX supports maximum of 1518 of jumbo frame size.
refer to this page
http://www.cisco.com/en/US/products/hw/modules/ps4835/products_data_sheet0900aecd8017376e.html
in "Table 4. Cisco Express Forwarding 256 10/100 and 10/100/1000 Modules"
hope this helps.
rate this post if satisfied.
10-25-2006 05:31 AM
Hi,
please let me know whether it supports jumbo frame ?
Regards,
Moorthy.
10-25-2006 06:14 AM
as i posted ealier it supports maximum of 1518 only & not more than in ur module WS-X6548-GE-TX.
hope now you are clear.
10-25-2006 08:57 PM
Hi,
I think u r talking about MTU SIZE.My requiremnet is whetther it supports Jumbo frame.
Regards,
Moorthy
10-25-2006 10:02 PM
Hi Moorthy,
NO IT DOESNN"T
WS-X6548-GE-TX
Maximum Frame Size (jumbo frame) Support
Up to 1518 bytes per frame
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: