Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

JUMBO FRAME SUPPORT on 6509 switch

please let us know whether WS-X6548-GE-TX suports JUMBO FRAME on cisco 6509 switch

Cisco Internetwork Operating System Software

IOS (tm) MSFC3 Software (C6MSFC3-PSV-M), Version 12.2(17a)SX1, EARLY DEPLOYMENT

RELEASE SOFTWARE (fc1)

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok

Regards,

Moorthy.

6 REPLIES
New Member

Re: JUMBO FRAME SUPPORT on 6509 switch

No, it doesn't...

//Mikhail Galiulin

Re: JUMBO FRAME SUPPORT on 6509 switch

Hi Moorthy,

WS-X6548-GE-TX supports maximum of 1518 of jumbo frame size.

refer to this page

http://www.cisco.com/en/US/products/hw/modules/ps4835/products_data_sheet0900aecd8017376e.html

in "Table 4. Cisco Express Forwarding 256 10/100 and 10/100/1000 Modules"

hope this helps.

rate this post if satisfied.

New Member

Re: JUMBO FRAME SUPPORT on 6509 switch

Hi,

please let me know whether it supports jumbo frame ?

Regards,

Moorthy.

Re: JUMBO FRAME SUPPORT on 6509 switch

as i posted ealier it supports maximum of 1518 only & not more than in ur module WS-X6548-GE-TX.

hope now you are clear.

New Member

Re: JUMBO FRAME SUPPORT on 6509 switch

Hi,

I think u r talking about MTU SIZE.My requiremnet is whetther it supports Jumbo frame.

Regards,

Moorthy

Re: JUMBO FRAME SUPPORT on 6509 switch

Hi Moorthy,

NO IT DOESNN"T

WS-X6548-GE-TX

Maximum Frame Size (jumbo frame) Support

Up to 1518 bytes per frame

1267
Views
0
Helpful
6
Replies
CreatePlease login to create content