Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Just created a new VLAN interface but not showing on VLAN database

Just created a new VLAN interface on 6509

ie interface vlan 300 but when type

sh vlan

vlan 300 is not there.

sh vtp status this switch is on server mode

any idea ??

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Just created a new VLAN interface but not showing on VLAN da

You will also need to create the layer 2 SVI. Here is an example.

switch#configure terminal

switch(config)#vlan 300

switch(config-vlan)#exit

switch(config)#

Mark

2 REPLIES

Re: Just created a new VLAN interface but not showing on VLAN da

You will also need to create the layer 2 SVI. Here is an example.

switch#configure terminal

switch(config)#vlan 300

switch(config-vlan)#exit

switch(config)#

Mark

Community Member

Re: Just created a new VLAN interface but not showing on VLAN da

It is working !! Thanks Mark

2531
Views
0
Helpful
2
Replies
CreatePlease to create content