Thank you for the fast reply. So in order for VoiP to move over any switch, the switch must have the capability of QoS Service and
the capability of creating Vlan's??!! Im asking this because, im moving a VoiP network to a new building. The thing is that this building already has
a layer 2 infraestructure and the one i'm moving is layer 2 switches that traffic IP and Voice; using a layer 3 master switch and this infraestructure has
a PBX server too. So the problem will be is that this building will have two PBX's and of course the administration won't like to call a neighbor in another cubicule by calling a whole number to get the extension. But at the same time they want two domains on the same building, kind of weird, but orders are orders. So the whole point is to use the existing switches to at least use them for voice traffic, but the exisiting switches are old. Soooo a little help will be nice hehehehe.
If I understand correctly you are trying to move the voip traffic from one building (infrastructure) to the other, correct me if I am wrong.
If that is correct all you need is to extend the l2 network (create voice vlan on all the switches in the path ) from one building to another building and still use the L3 switch to routing purpose. What are the switches that you are going to use.
For example if your current voice vlan 2.
phone----old buliding switch----------new building switch----new phone.
Also you need is to establish connectivity on vlan between the two switches. Basically configure a trunk link between two switches and create vlan 2 on the new building switch.
Ok, the switches that are moving from the old building are Enterasys, i dont know the model, but they run all that i need, because they are running it right now. The switches in the new building are nortel baystack 350-24T, pretty old switch. I did enter to the console line of this old switch and they can make Vlans, but i dont see anything about Qos in the firmware. Another thing i forgot to write was, that the vlan that we use for voice is the 10, so im guessing that this vlan i have to open it in the switches of the old building, right? The this is that the new building doesn't have a PBX voice over ip, just plane telephones with extension, no ip involved. So the switches just move comm to the computers and servers, so that when all the problem begins. As i mentioned earlier, the switches that the new building are using are pretty old and i dont know if they can be used for Voip. I appreciate the help JayaKrishna.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.