Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

L2-Switch security ---DHCP snooping

Can we configure switch security features like ip source guard / DHCP snooping on L2 switch?

3 REPLIES
Hall of Fame Super Bronze

Re: L2-Switch security ---DHCP snooping

You could do DHCP Snooping, see the documentation on the 2960 (your typical L2 switch)

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_40_se/configuration/guide/swdhcp82.html

I couldn't find any information regarding ip source guard so I assume it's not supported

HTH,

__

Edison.

Community Member

Re: L2-Switch security ---DHCP snooping

Thanks

Can we do IP based control on L2 switch.

Like only particular IP address will be connected to particular switch port

Vaishali

Hall of Fame Super Bronze

Re: L2-Switch security ---DHCP snooping

IP Based Control ? Do you mean ACLs ?

Well, good question. The documentation states that it can be done

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_40_se/configuration/guide/swacl.html

However, I haven't had the pleasure to do L3 ACLs in L2 switches, so please test away and good luck :)

HTH,

__

Edison.

320
Views
0
Helpful
3
Replies
CreatePlease to create content