Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

L2 Vlan on 6500 Switch

I have two 6500 switches as core and running hsrp. i need to create one L2 VLAN and don't want inter-communication with other Vlans. i also need running HSRP.

how i can get it. because if create one Vlan and don't create it's SVI interface it is what i neen but for HSRP feature when i create SVI it starts communication with other VLans.

i also dont want to create access-list to dis-allow inter valn communication.

if there is any solution please help me.

thanks,

4 REPLIES
New Member

Re: L2 Vlan on 6500 Switch

Place the SVI's in a VRF away from your global routing table.

New Member

Re: L2 Vlan on 6500 Switch

thanks for replying

plz explain it in more detail.....

Hall of Fame Super Blue

Re: L2 Vlan on 6500 Switch

If you don't want to use acl's and you have to have a L3 interface for this new vlan then you can use vrf-lite to separate this vlan from your other vlans. Basically vrf-lite will allow you to have 2 separate routing tables, one for the new vlan and one for the rest.

See this attached link for configuring vrf-lite -

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/50sg/configuration/guide/vrf.html

Note the link is for a 4500 config but vrf-lite works on the 6500 as well.

Jon

New Member

Re: L2 Vlan on 6500 Switch

Thanks Jon,

it was very helpful document but somewhere i think it is related to VPNs and ISP.

at my end how can implement this.

plz help with example for SVIs or VLANs.

168
Views
7
Helpful
4
Replies