Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Highlighted
New Member

L2TP tunnel on 3750 Switches

Hi ,

I have tried configuring L2TP on 3750 switches , but switch is not taking L2TP (X-connect and pseudowire) configuration.

Could someone please advise if we can configure L2TP on L3 switches ?

I have tried it on GNS3  on &7200 router and its working as expected.

Below is the configuration which I’m trying to execute on cisco switches but no luck.

http://www.cisco.com/c/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/116266-configure-l2-00.html

 

 

Below is the IOS image which I’m using in my LAB for the implementation..

c3750-ipservicesk9-mz.122-55.SE10.bin.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

I believe you can only do

I believe you can only do this on the Metro Ethernet switches (like the ME3750 - not the standard Catalyst 3750).

1 REPLY
VIP Purple

I believe you can only do

I believe you can only do this on the Metro Ethernet switches (like the ME3750 - not the standard Catalyst 3750).

571
Views
4
Helpful
1
Replies
CreatePlease to create content