Hi.
I have configured a L2TPV3 tunnel between two routers and have got traffic flowing through the tunnel OK. I now want to stop BPDU's from going across the tunnel. Is there anyway I can do this?
The basic config from my routers is below:
Router 1
pseudowire-class cte
encapsulation l2tpv3
ip local interface FastEthernet0/1
!
!
!
!
!
interface FastEthernet0/0
desc layer 2 only
no ip address
duplex full
speed 100
no cdp enable
xconnect 10.64.10.1 pw-class cte
!
interface FastEthernet0/1
desc L2TPv3 routed interface
ip address 172.16.10.1 255.255.255.252
duplex full
speed 100
!
router eigrp 1
network 172.16.0.0
no auto-summary
!
Router 2:
pseudowire-class cte
encapsulation l2tpv3
ip local interface FastEthernet0/1
!
!
!
!
!
interface FastEthernet0/0
desc layer 2 only
no ip address
duplex full
speed 100
no cdp enable
xconnect 172.16.10.1 pw-class cte
!
interface FastEthernet0/1
desc L2TPv3 routed interface
ip address 10.64.10.1 255.255.255.0
duplex full
speed 100
!
router ospf 1
network 10.64.10.1 0.0.0.0 area 0