Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

L2TPv3 on 3640

Hi gurus,

What ios version i can use for my 3640 to simulate L2TPv3.

THanks.

jeff

5 REPLIES
Hall of Fame Super Silver

Re: L2TPv3 on 3640

Hello Jeff,

you can use feature navigator for this

www.cisco.com/go/fn

I tried looking for plaftfrom C3640 there is only L2TPv2.

if I look for L2TPv3 I cannot find C36540 among the supporting platforms.

However, I've seen one C3640 used in this way at last course I took part.

I think that if you load a late 12.3T you should be fine or 12.4

Hope to help

Giuseppe

New Member

Re: L2TPv3 on 3640

Helo Giuseppe,

Yes i did use the navigator and found no match for this. If you notice i think this is inline with my threads, i will try this first and check EoMPLS. Have you tried this l2tpv3?

Thanks for all the help.

Jeff

Hall of Fame Super Bronze

Re: L2TPv3 on 3640

pseudowire-class NETPRO

encapsulation l2tpv3

ip local interface FastEthernet0/1

!

!

!

!

!

!

interface FastEthernet0/0

no ip address

duplex auto

speed auto

no cdp enable

xconnect 1.1.1.1 1 pw-class NETPRO

!

Router#sh ver | i IOS

Cisco IOS Software, 3600 Software (C3640-IK9S-M), Version 12.4(17), RELEASE SOFTWARE (fc1)

Router#

New Member

Re: L2TPv3 on 3640

Hi Guys,

Still, i dont have any luck upgrading my 3640 with l2tpv3, what should be included on the ios?

#sh ver | i IOS

Cisco IOS Software, 3600 Software (C3640-I-M), Version 12.4(23), RELEASE SOFTWARE (fc1)

Thanks.

Hall of Fame Super Bronze

Re: L2TPv3 on 3640

You have IP Feature set while I had IP Plus

276
Views
0
Helpful
5
Replies
CreatePlease to create content