Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

L3 Etherchannel Question

Hi - i'm trying to configure an L3 Ether-channel between a 6509 & a stacked 3750E.

I'm getting the following, and the ports won't come up. Any ideas?

50-5-STACK#sh etherchannel

Channel-group listing:

----------------------

Group: 7

----------

Group state = L3

Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1

Protocol: -

50-5-STACK#sh etherchannel de

50-5-STACK#sh etherchannel detail

Channel-group listing:

----------------------

Group: 7

----------

Group state = L3

Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1

Protocol: -

Ports in the group:

-------------------

Port: Gi2/0/49

------------

Port state = Down Not-in-Bndl

Channel group = 7 Mode = On Gcchange = -

Port-channel = null GC = - Pseudo port-channel = Po7

Port index = 0 Load = 0x00 Protocol = -

Age of the port in the current state: 0d:00h:07m:38s

Port: Gi3/0/49

------------

Port state = Down Not-in-Bndl

Channel group = 7 Mode = On Gcchange = -

Port-channel = null GC = - Pseudo port-channel = Po7

Port index = 0 Load = 0x00 Protocol = -

Age of the port in the current state: 5d:21h:17m:24s

Port-channels in the group:

---------------------------

Port-channel: Po7

------------

Age of the Port-channel = 0d:00h:18m:49s

Logical slot/port = 10/7 Number of ports = 0

GC = 0x00000000 HotStandBy port = null

Passive port list = Gi2/0/49 Gi3/0/49

Port state = Port-channel L3-Ag Ag-Not-Inuse

Protocol = -

Time since last port bundled: 0d:00h:12m:55s Gi2/0/49

Time since last port Un-bundled: 0d:00h:11m:10s Gi2/0/49

1 REPLY

Re: L3 Etherchannel Question

can you post the interfaces configs participating in etherchannel from both the sides?

Narayan

191
Views
0
Helpful
1
Replies