Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

LACP Implementation with HP servers and CISCO

Hello ,

I need to implement LACP HP servers mostly DL 380 g7 with Intel based dual port with two types of Cisco equipment

  1. first scenario server connected to 3750x stack of 4 switch's .
  2. second scenario same server type connected to two Cisco Nexsus 5596 .

My question regarding two type of connection

  • Is it possible to do active active ?
  • Would it give fault tolerance ?
  • With HP LACP implementation is there known issue or should i expect latency with such configuration?
  • What is the maximal lag- channel group that is possible per type?

how

Please advise

Thanks 

Everyone's tags (4)
1 REPLY
Green

LACP Implantation with HP servers and CISCO

Hi,

For the 3750X have a look at the config guides.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_53_se/configuration/guide/swethchl.html#wp1275535

Regards

Alex

Regards, Alex. Please rate useful posts.
1324
Views
0
Helpful
1
Replies
CreatePlease to create content