Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LACP rate on Cisco 2960S

Hi,

I have C2960S-UNIVERSALK9-M switch with Version 12.2(55r)SE.

I have a port-channel lacp mode with two interfaces.

I need to change the lacp rate to fast.

doing show etherchannel 3 detail

Local information:

                            LACP port     Admin     Oper    Port        Port

Port      Flags   State     Priority      Key       Key     Number      State

Gi0/9     SA      bndl      32768         0x3       0x3     0x10A       0x3D 

Partner's information:

                  LACP port                        Admin  Oper   Port    Port

Port      Flags   Priority  Dev ID          Age    key    Key    Number  State

Gi0/9     FA      255       001c.7f81.03d7  16s    0x0    0x11   0x2     0x3F 

You can see that i'm on port state 0x3D (slow) and the other device port state is 0x3F (fast).

how can I change it?

Thanks,

Daniel.

Everyone's tags (4)
2 REPLIES
VIP Super Bronze

LACP rate on Cisco 2960S

Hi,

I don't think the 2960 series support "lacp rate fast".  As far as I know, it is available on the 6500 series.

HTH

New Member

LACP rate on Cisco 2960S

I switched to 6524 and it works

1116
Views
0
Helpful
2
Replies
CreatePlease to create content