Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
fly
New Member

LACP,same speed,duplex,native vlan,vlan range

                   does LACP require same  native vlan, vlan range on physical port and logical interface?

                  such as

                  I config vlan range on physical interface for vlan 10-100

                   and config vlan range on physical interface for vlan 100-200

                  and config vlan range on interface port-channel 1 for vlan range 20-100

                   is there any problem, or can lacp form etherchannel?

    thank you!

Tom

3 REPLIES
Hall of Fame Super Gold

LACP,same speed,duplex,native vlan,vlan range

does LACP require same  native vlan, vlan range on physical port

Yes.

logical interface

You mean Port Channel interface number?  No.  Interface number is "locally significant".

is there any problem, or can lacp form etherchannel?

Post the config and the result to the command "sh etherchannel summary".

fly
New Member

LACP,same speed,duplex,native vlan,vlan range

i mean I config vlan range on physical interface gi3/1 for vlan 10-100

                   and config vlan range on physical interface gi3/2 for vlan 101-200

                   this two physical interface form etherchannel port-channel 1

                  and config vlan range on interface port-channel 1 for vlan range 20-100,

                CAN this port-channel up?

Tom

Hall of Fame Super Gold

LACP,same speed,duplex,native vlan,vlan range

No.

Your port-channel is composed of Gig 3/1 and Gig 3/2.  Both interface have DIFFERENT allowed VLANs.  Therefore the port-channel will stay down.

183
Views
0
Helpful
3
Replies
CreatePlease to create content