Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LACP - sge2000P to Catalyst 3750

Greetings,

Does anyone know if it is possible to configure LACP etherchannel to a Catalyst 3750?  Playing around with the SMB switches for the first time. 

I know how to do it on the 3750 but am having trouble figuring out the sge2000p.  Any advice or configs would be helpful.

Thanks

Carlton

2 REPLIES
New Member

LACP - sge2000P to Catalyst 3750

Did you ever figure this out? I have the same issue.

Cheers,

H

Green

LACP - sge2000P to Catalyst 3750

Hi, yes the LAG and LACP is possible.

Remember if the settings do not match EXACTLY, you will broadcast loop the switch and likely lose access to the SGE switch.

However, the LACP options on the SGE switch is very limited, it is either enabled or disabled, nothing in between. If you're looking for only a LAG that is static, I would highly recommend just use an on command and abandon the LACP all together.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
377
Views
0
Helpful
2
Replies