Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

lacp suspend-individual command

Hello Guys,

I have a Nexus 5548 that i connecting to an ESX Virtual Server with a virtual switch between.

i have a port channel connection from the Nexus to the virtual switch. The question is would there be any risk of not having the lacp suspend-individual command on this port channel?

Currently without this command, the port channel is in an individual state.

Thanks in advance for the feedback.

3 REPLIES
VIP Super Bronze

lacp suspend-individual command

Hi,

I think, you apply it if you need it.

To enable individual Link Aggregation Control Protocol (LACP) port suspension behavior on a port channel, use the

lacp suspend-individual

command. To disable individual port suspension behavior on the port channel, use the

no form of this command.

.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/interfaces/command/reference/if_commands.html#wp1717484

HTH

Silver

lacp suspend-individual command

Since the port-channel is in individual state, if you apply the command it will go to the suspened state. Please check the below thread

https://supportforums.cisco.com/thread/2136554

Siddhartha

Siddhartha
New Member

lacp suspend-individual command

thanks for your response guys

619
Views
3
Helpful
3
Replies
CreatePlease to create content