Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LAN Per-User Rate Limiting Solution

Hi All,

We have a guest wireless setup but I need to rate limit the users so no one hogs all the bandwidth. The WLC is connected into a 3750 which is doing all the routing between the vlans. I know I cannot shape the traffic on the 3750 but can someone help or point me in the right direction on how to set this up.

Thanks,

Ross.

Everyone's tags (4)
2 REPLIES

LAN Per-User Rate Limiting Solution

Hi Ross,

except the presence of not-disciplined user i really do not see why you would want to rate limit per user!! It is a lot of work and overload for your devices...

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml

Have a look to the link above and you will find your direction. Before applying any QoS however i strongly reccomend you to span the data flows produced from the whole infrastructure and to analyse (wireshark would do) which flows you intend to reduce or to prioritise.

should you have a need for a user -rate limiting i would identify that user(s) by an ACL and then manipulating his/her data flows.

I think anyway that i common policy would benefit everybody .

HTH

Alessio

Re: LAN Per-User Rate Limiting Solution

Hi,

If you have proxy server in your setup you can configure the rate limit as user based.

Thanks.

1068
Views
0
Helpful
2
Replies