Hello everyone,
First of all sorry for my english, i'll probably will make some grammar mistakes, but i think we could understand
I'm newbie with cisco routers (I have only done The CCNA-1 and 2) And I'm having some troubles when I want to connect my router 881W to my ADSL and give internet to my lan.
By the moment this is my configuration:
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
memory-size iomem 10
crypto pki token default removal timeout 0
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
license udi pid CISCO881W-GN-E-K9 sn FCZ1617C502
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface FastEthernet4
ip address dhcp
duplex auto
speed auto
!
interface wlan-ap0
description Service module interface to manage the embedded AP
no ip address
shutdown
arp timeout 0
!
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
no ip address
!
interface Vlan1
no ip address
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1 254
!
!
!
!
!
!
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
login
transport input all
!
end
I just want to have internet connection from the Fast Ethernet 0 to 3. Right know I only have internet from the Fast Ethernet 4 (The Wlan) pinging from the router to outside.
Thanks for all.
