Does anyone know or tested latency from port to port on a Nexus FEX? We are seeing some weird/strange results to MTU above 1500. Everything has been configured for jumbo (9216). The FEX is a N2K-C2232PP-10GE and its attached to a Nexus9000 C9396PX 1/10G Module.
Port to Port Layer 2 on the FEX we are seeing around 76us
Traffic from the traffic generator connected to a FEX, to the traffic generator on the Nexus 9300, we are seeing around 74us
Traffic from the traffic generator connected to the Nexus 9300, to the traffic generator on the FEX, we are seeing around 2us.
Any ideas why the latency seems high in one direction? Same test on the 9300 only is fine also.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.