05-22-2008 03:45 AM - edited 03-05-2019 11:09 PM
I have 3*3750s Stacked switches in my LAN. When I ping other devices on the LAN, the ping time is < or = 1ms. However when I ping the switch itself, the ping time can go up to 25 ms. Please advice on what is happening.
05-22-2008 03:54 AM
use "pathping" AND TRACERT command check where packet is droping ..
05-22-2008 09:37 PM
Whe I do a Tracert, it shows that the switch is reached instantly and dirrectly.
05-22-2008 05:27 AM
Ping response from a switch interface is put on low priority and is not a good way to test latency , always ping to a device hung off the switch itself .
05-22-2008 08:51 AM
Agreed, ICMP is a low priority process. Maybe you have something else going on on this switch?
Check:
sh proc cpu
sh int | inc is up|drop
You may have the CPU chewing on some packets hitting the SW queues. See if you have drops or flushes in the software queues (L3 interfaces).
Regards,
John Gill
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide