12-12-2013 05:32 PM - edited 03-07-2019 05:03 PM
folks
i have a quick question i'm hoping you can help with
i have a layer 3 etherchannel between 2 * 3750G stacks, both clusters use gi1/0/25 and gi/2/0/25 for the etherchannel and both are set as 'on'
i have traffic passing over the link but i get the following output from a show etherchannel detail
there are no bits being recorded and the load is 0x00
can someone help to explain this please?
thanks to anyone taking the time to reply
Group: 10
----------
Group state = L3
Ports: 2 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol: -
Minimum Links: 0
Ports in the group:
-------------------
Port: Gi1/0/25
------------
Port state = Up Mstr In-Bndl
Channel group = 10 Mode = On Gcchange = -
Port-channel = Po10 GC = - Pseudo port-channel = Po10
Port index = 0 Load = 0x00 Protocol = -
Age of the port in the current state: 10d:01h:43m:57s
Port: Gi2/0/25
------------
Port state = Up Mstr In-Bndl
Channel group = 10 Mode = On Gcchange = -
Port-channel = Po10 GC = - Pseudo port-channel = Po10
Port index = 0 Load = 0x00 Protocol = -
Age of the port in the current state: 10d:01h:43m:54s
Port-channels in the group:
---------------------------
Port-channel: Po10
------------
Age of the Port-channel = 10d:01h:45m:24s
Logical slot/port = 10/10 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Passive port list = Gi1/0/25 Gi2/0/25
Port state = Port-channel L3-Ag Ag-Inuse
Protocol = -
Port security = Disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------+------------------+-----------
0 00 Gi1/0/25 On 0
0 00 Gi2/0/25 On 0
Time since last port bundled: 10d:01h:43m:54s Gi1/0/25
12-13-2013 11:42 AM
folks
anyone any ideas?
12-13-2013 11:52 AM
Hi,
I guess this is just a hardware limitation on the 3k platforms (ASICs).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide