Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Layer 3 Etherchannel on C2960X

Hello all,

Does Cisco 2960X catalyst switches support Layer 3 Etherchannel ?

I went throught the datasheet, where it mention of supporting Etherchannel technology only.

Can any body confirm it to me please that does it support layer 3 etherchannel or not ?

Following is the exact part number of device from BoQ

WS-C2960X-48FPD-L

Catyalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Layer 3 Etherchannel on C2960X

2960-X only has LAN Base.  This has very limited Layer 3 functionality.

2960-XR, however, has IP Lite and can do some routing stuffs.  In my opinion, if you want Layer 3 etherchannel, 2960-XR is your choice.

2 REPLIES
Hall of Fame Super Gold

Layer 3 Etherchannel on C2960X

2960-X only has LAN Base.  This has very limited Layer 3 functionality.

2960-XR, however, has IP Lite and can do some routing stuffs.  In my opinion, if you want Layer 3 etherchannel, 2960-XR is your choice.

New Member

Layer 3 Etherchannel on C2960X

Ok Leo,

We have already proposed 2960-X to the customer.

Thanks for confirmation.

Regards,

288
Views
0
Helpful
2
Replies