I have completed CCNP routing BSCI. Now I will move to switching exam. A colleague here tells me he did his switching practice using a Layer 3 router with switching module as opposed to a standard switch.
Will the commands and functionality be the same or similar using this type of setup as opposed to normal Layer 2 switches?
Im led to believe he loaded an IOS into dynamips with a switching module to practice.
Re: Layer 3 switching module compare to Normal switch
Most of the config will be similar - the biggest CLI changes with an L3 capable switch are the facility to add IP addresses to more than one VLAN, the ability to issue "ip routing" and static routes other than ip default-gateway, and the ability to configure some routing processes.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.