I have upgraded 3560 to the latest. Before upgradation, enforcement of ipbase is showing as yes, however, after upgradation, it is showing as no.
moreover, in show version output, license level & type are ipbase and permanent respectively. can some one tell me why it is showing two different outputs. Moreover, how can i have same license features (ipservices and advipservices) as i was having with my old ios with new IOS as these features are not activated with new IOS. Please note i m using universal ios wid crypto supprot. c3560e-universalk9-mz.150-1.SE2.bin , old ios was c3560e-universal-mz.122-35.SE5.
#sh license fe
Feature name Enforcement Evaluation Clear Allowed
ipbase yes no yes
ipservices yes no yes
advipservices yes no yes
Switch#sh license fea
Feature name Enforcement Evaluation Clear Allowed Enabled
advipservices yes no yes no
ipservices yes no yes no
ipbase no no yes yes
Switch#sh license detail Index: 1 Feature: ipbase Version: 1.0 License Type: Permanent License State: Active, In Use License Priority: Medium License Count: Non-Counted Store Index: 0 Store Name: Primary License Storage
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...