Licenses needed for VSS

[alukes]

How many licenses do I need for two 6500 with supT2s running VSS?

Also what does the license state active, not in use mean? It seems contradictory.

show license feature shows enabled no. What does that mean?

what features are turned on using  MACSec_Encryption.

Router#sh license all
License Store: Primary License Storage
StoreIndex: 0   Feature: MACSec_Encryption                 Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium

Router#sh license feature
Feature name             Enforcement  Evaluation  Subscription   Enabled
MACSec_Encryption        yes          no          no             no  

Router#

[krun_shah · Accepted solution]

No license required for running VSS with sup2T and IOS 15.0SY.

MACSec License is only needed if you are doing encryption for VSL.

License State: Active, Not in Use

AND

show license feature shows enabled no.

This means is MACSec is not configured so license was not activated.

[alex.romaya]

Gents,

I have the following :-

6500core#sh license all

License Store: Primary License Storage

License Store: Evaluation License Storage

StoreIndex: 0   Feature: TEST_FEATURE_1                    Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period: 4  weeks 2  days

            Evaluation period left: 4  weeks 2  days

        License Count: Non-Counted

        License Priority: None

StoreIndex: 1   Feature: TEST_FEATURE_2                    Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period: 1  hour  0  minute

            Evaluation period left: 1  hour  0  minute

        License Count: Non-Counted

        License Priority: None

Nothing says permanent am I missing something?

Thanks