Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Limiting amount of bandwidth

I have a Cisco 7606 running 12.2.  I want to limit the interface that is used by one of our customers to 30M.

Tom Summers                  

Everyone's tags (3)
3 REPLIES
Silver

Re: Limiting amount of bandwidth

You can use a class-map to match the traffic and a policy-map for rate limiting

ip access-list 101 permit ip X.X.X.X 0.0.0.255 Y.Y.Y.Y 0.0.0.255

class-map match-any customer-traffic

match access-group 101

policy-map customer-ratelimit

class customer-traffic

police cir 30000

interface s0/0---- interface connected to the customer

service-policy output internet

service-policy input internet

Siddhartha
Silver

Limiting amount of bandwidth

Thomas Summers wrote:

I have a Cisco 7606 running 12.2.  I want to limit the interface that is used by one of our customers to 30M.

Tom Summers                  

Put a QoS policy on the port rate limiting it.

Something like this

class-map match-any ip-any
  match access-group 1
!
policy-map 30Mbps
  class ip-any
    police 30000000 0 exceed-action drop
!
interface FastEthernet0/1
 description "customer 123 port 1"
 no switchport
 ip address 172.16.0.1 255.255.255.252
 no ip proxy-arp
 service-policy input 30Mbps
service-policy output 30Mbps
duplex full speed 100

access-list 1 permit any

I haven't done this myself (I don't have any 7600's, let alone need to police bandwidth) - I shamelessly stole it from somewhere else and modified it - but you should get the idea - JFGI for more examples.

Cheers.

Gold

Limiting amount of bandwidth

hi,

do you need a total of 30 Mbps RX/TX (15Mbps send / 15Mbps Receive) or 30Mbps for each way?

you can apply you police on the class-default which basicaly includes all traffic not in a list or defined!

policy-map LIMIT

class class-default

  police 30000000 conform-action transmit exceed-action drop

interface f0/0

service-policy in LIMIT

service-policy out LIMIT

pls Rate if Helped

Hope it Helps!

Soroush.
604
Views
0
Helpful
3
Replies
CreatePlease login to create content