With a properly configured switch and router setup, should HSRP multicast traffic destined for the all routers address 18.104.22.168 be seen by all endstations? If not, what specific router and/or switch configuration settings are needed to limit/restrict the all router multicast hsrp traffic to only router interfaces on the vlans?
Yes it will be seen by all end stations within that vlan. The reason being that reserved multicast addresses of which 22.214.171.124 is one will be flooded on the ethernet segment regardless of whether you are using CGMP or IGMP on the switch.
You could use vlan access-lists to filter the traffic from reaching end stations i guess but it might well be more bother than it is worth.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.