Line Card Poe Question

amunoz · ‎11-08-2011

Hi

I have a 4507re with a power suply data only (1000 watts) if a want to insert a ws-4648-rj45v+e (poe linecard) my question is

it will be up? i mean i know that poe will not work, but what about a data? the line card will work like normal non poe linecard, or

it will not up at all?

thanks

nkarpysh · ‎11-08-2011

Hello,

Yeap it should work fine for data (without PoE) as long as you have enough capacity to power all your modules.

Reference:

Therefore the information I found in the following link:

Please read under Table 2.

The Cisco Catalyst 4500 E-Series offers a variety of power supplies and

accessories to meet the diverse needs of enterprise and service provider

customers. All available Cisco Catalyst 4500 Series power supplies can be

used for data-only deployments, which typically require just a few hundred

watts. For deployments that dictate support for PoE power, Cisco offers

several options.

The Cisco Catalyst 4500 E-Series offers AC power with several internal

supplies: 1000W (data only), 1400W (data only), 1300W (data and PoE), 2800W

(data and PoE), 4200W (data and PoE), and 6000W (data and PoE). When 5500W

or less are required, the 4200W power supply can provide 5500W while

protecting the chassis from a power or power-supply sub-unit failure. When

more than 5500W of redundant data and PoE are required for a Cisco Catalyst

4500 Series chassis in an AC-powered environment, Cisco offers an external

AC power shelf that houses two 2500-WAC power supplies. When two power

shelves are combined, they can produce 7500W-the remaining 2500W supply can

be used for N + 1 protection. All Cisco Catalyst 4500 AC power supplies are

single phase.

Nik

HTH,
Niko