Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 091125-001196]

Dear Sir or Madam,

I have a question regarding the WS-C4506 chassis.

Is it possible that a WS-X4448-GB-RJ45 line card to operate?

Sincerely,

Christopher Köber

c.koeber@spie.com

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 09

Chris,

I think your question is, is it possible to install a WS-X4448-GB-RJ45 in cat 4506.


Yes, see this document:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1077306

HTH

Reza

3 REPLIES
VIP Super Bronze

Re: Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 09

Chris,

I think your question is, is it possible to install a WS-X4448-GB-RJ45 in cat 4506.


Yes, see this document:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1077306

HTH

Reza

Hall of Fame Super Silver

Re: Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 09

Hello Christopher,

yes it is supported see it is even supported in a C4006

sh module
Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    2     1000BaseX Supervisor      WS-X4013            no  ok
2   2    48    10/100/1000 Ethernet      WS-X4548-GB-RJ45    no  ok
3   3    48    Inline Power Module       WS-X4148-RJ45V      no  ok
4   4    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok
5   5    48    10/100/1000 Ethernet      WS-X4548-GB-RJ45    no  ok
>> 6   6    48    10/100/1000 Ethernet      WS-X4448-GB-RJ45    no  ok

with catos 8.4(11)GLX

and also on C4506

sh module
Chassis Type : WS-C4506

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4013+          JAE081161WP
2    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE081169LZ
3    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE081169NL
>>> 4    48  1000BaseX SFP                          WS-X4448-GB-SFP    JAB085103MM
5    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE08491S7Z
6    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE11097GZM

these are two devices in production

Hope to help

Giuseppe

New Member

Re: Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 09

Hi Giuseppe and Reza,

thanks for your answers.
We have a customer that have a Cat4006 Chassis with WS-X4448-GB-RJ45 line cards.

Since Cisco has discontinued the device, we want to offer customers a Cat4506.

Many thanks for the answer.

Sincerely,

Christopher

1728
Views
5
Helpful
3
Replies
CreatePlease login to create content