Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Link Flap error-disable

All,

Could someone point me out to some documentation or explain to me what exactly is regarded as a "link-flap" for error-disable detection ?

Is this one up/down in one second ? three up/downs in 2 seconds ? four consequetive up/down ?

Geert

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Link Flap error-disable

Hey Geert,

The interface is put into the errdisabled state if it flaps more than five times in 10 seconds.

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml

best regards

Sebastian

2 REPLIES

Re: Link Flap error-disable

Hey Geert,

The interface is put into the errdisabled state if it flaps more than five times in 10 seconds.

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml

best regards

Sebastian

Bronze

Re: Link Flap error-disable

It is often so difficult to find the correct document on the web site. I searched for over an hour for this document. tkx.

27579
Views
0
Helpful
2
Replies