Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Linux PPPD command to establish a PPP conection with Aux Port

Hi,

I cannot connect make any PPP connection to a Cisco 2600 Aux port with Windows 7 or Vista. Is there anybody who would know how to establish a PPP connection to an aux port using Linux PPPD.

Here is my 2600 configuration:

username cisco password cisco

interface Async65       
ip address 10.10.10.10 255.255.255.0

encapsulation ppp

async mode interactive

peer default ip address 10.10.10.11

no cdp enable

ppp authentication chap

line aux 0                       

password cisco        

login

modem InOut

transport input all

escape-character NONE

autoselect during-login

autoselect ppp

stopbits 1

speed 19200

flowcontrol none

Thanks for your help

Stephane

133
Views
0
Helpful
0
Replies
CreatePlease to create content