Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Load Balance between 3 877 ADSL routers

Greetings to all, I am in need of some expert advice.

I have 3 877 ADSL routers for internet connectivity.  I recently installed a FW behind them and would like to use the Ciscos as load balance in order to get better utilization from my 3 internet links.

Any ideas?

1) the 3 routers are on DHCP from the ISP on the WAN side.

2) the 3 ciscos are on the same class C subnet on the LAN side: 10.201.1.252, 10.201.1.253 and 10.201.1.254

Thanks!!!

Everyone's tags (2)
3 REPLIES
New Member

Re: Load Balance between 3 877 ADSL routers

Configure GSLB or VRRP on your routers.

Sent from Cisco Technical Support iPhone App

New Member

Re: Load Balance between 3 877 ADSL routers

Hey there thanks.

How do I configure these, any examples or links please?

Thanks.

Sent from Cisco Technical Support iPhone App

New Member

Re: Load Balance between 3 877 ADSL routers

Hi Humberto,

Sorry it's GLBP not GSLB.

To configure it:

Router 1:

interface fx/y

ip address 1.1.1.2 255.255.255.0

glbp 7 ip 1.1.1.1

glbp 7 priority 150

glbp 7 timers msec 200 msec 700

Router2:

interface fx/y

ip address 1.1.1.3 255.255.255.0

glbp 7 ip 1.1.1.1

glbp 7 priority 100

glbp 7 timers msec 200 msec 700

Router 3:

interface fx/y

ip address 1.1.1.4 255.255.255.0

glbp 7 ip 1.1.1.1

glbp 7 priority 50

glbp 7 timers msec 200 msec 700

Hope this helps.

970
Views
0
Helpful
3
Replies
CreatePlease login to create content