Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Load Balance

In 12.3T Cisco increased the number of BGP equal path links from 6 to 16. Does any one knows if they increased for the OSPF and static routes as well. Is there any supporting document on Cisco web sites?

Thanks in advance..

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Load Balance

Hi,

Any IOS 12.3(2)T and later should support this for you.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801a7f79.html

HTH,

Mohammed Mahmoud.

3 REPLIES

Re: Load Balance

Hi,

Yes it is, for static routes this was added by default, for all the routing protocol you must use the command "maximum-paths".

HTH,

Mohammed Mahmoud.

New Member

Re: Load Balance

I searched Cisco web site and can not find it this info, I just need to know which IOS I need to have in order to allow 12 equal path load sharing for either static or OSPF.

Re: Load Balance

Hi,

Any IOS 12.3(2)T and later should support this for you.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801a7f79.html

HTH,

Mohammed Mahmoud.

128
Views
0
Helpful
3
Replies
CreatePlease to create content