Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Load balancing****************************************

Hi,

I have two 512 kbps of link from same ISP and both link were terminated on same router. I have different LAN/WAN pool for both ISP. M using nat on same router but want to do load sharing on both link.How it is possible.

Pls help me out,

Thanks ..

3 REPLIES
Silver

Re: Load balancing****************************************

normally, we can use BGP for that :-) but if you can't do it because your ISP refuses to do it for you, think about PBR & Multiple Tracking.

this is an example of config: http://www.hassairi.50megs.com/#pbrtr

you should add the NAT commands...

HTH and hope it works :-)

Community Member

Re: Load balancing****************************************

Hi, you can do load sharing by dividing users in 2 groups and assign natting of group 1 to pool 1 and group 2 to pool 2 of the ISP, in this way i am quite sure that load sharing can be achieved,

Hall of Fame Super Gold

Re: Load balancing****************************************

RAKESH has posted the same question on the WAN Routing and Switching forum where it has generated several responses. I suggest that any further discussion of this question be consolidated in the WAN forum.

HTH

Rick

130
Views
0
Helpful
3
Replies
CreatePlease to create content