ā01-26-2014 01:55 PM - edited ā03-07-2019 05:48 PM
When I console into the my 3550 and 3560 switches i'm not able to see the messesage appear if a interface goes down. But If I use a putty session and telnet into my directly connected (i can't see the logs only on a sh log) or telnet into the other switches from that switch I'm only able to see the logs by issuing a show log.
Solved! Go to Solution.
ā01-26-2014 02:17 PM
Type in 'term mon' and hit enter, let me know if this fixes the issue.
ā01-26-2014 02:17 PM
Type in 'term mon' and hit enter, let me know if this fixes the issue.
ā02-15-2022 01:49 AM
i'm enter this command on cisco 4500.but switch cant show log messages.switch just shows this log
(3w3d: %C4K_IOSMODPORTMAN-6-POWERSUPPLYFANGOOD)
ā01-26-2014 02:44 PM
In addition to what johns stated, be careful doing a term mom for certain debugs. They can crash your telnet session if there's too much data. You mentioned tat you also aren't seeing log messages on the console. If you're wanting to, make sure you have 'logging console
Hth,
John
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: