Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Log messages not appearing on telnet

When I console into the my 3550 and 3560 switches i'm not able to see the messesage appear if a interface goes down. But If I use a putty session and telnet into my directly connected (i can't see the logs only on a sh log) or  telnet into the other switches from that switch I'm only able to see the logs by issuing a show log.

1 ACCEPTED SOLUTION

Accepted Solutions

Log messages not appearing on telnet

Type in 'term mon' and hit enter, let me know if this fixes the issue.

2 REPLIES

Log messages not appearing on telnet

Type in 'term mon' and hit enter, let me know if this fixes the issue.

Re: Log messages not appearing on telnet

In addition to what johns stated, be careful doing a term mom for certain debugs. They can crash your telnet session if there's too much data. You mentioned tat you also aren't seeing log messages on the console. If you're wanting to, make sure you have 'logging console ' enabled.

Hth,
John

Sent from Cisco Technical Support iPhone App

HTH, John *** Please rate all useful posts ***
348
Views
0
Helpful
2
Replies