Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Log messages on a 4500 switch L3

We are getting the following message after an IOS upgrade.

Sep 16 05:34:30.376 PDT: %C4K_PKTPROCESSING-4-ERRORPACKET: Warning - Unexpected packet hitting output

acl

pdd = 0x9A02A160, 0x0FF8006B

107 bytes: 00 00 0C 07 AC 01 00 15 C5 5C A9 87 08 00 45 00

00 59 C8 B0 00 00 FF 11 05 1C AC 11 15 5F AC 10

80 46 F8 D0 00 35 00 45 B0 08 CD 12 0

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Output Acl HW Cam Stats

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 0 PacketCount: 29826

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 17 PacketCount: 577553

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 48 PacketCount: 3

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 49 PacketCount: 3

Sep 16 05:34:30.376 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 51 PacketCount: 18

Sep 16 05:34:30.380 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 64 PacketCount: 34079

Sep 16 05:34:30.380 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 130 PacketCount: 2437534

Sep 16 05:34:30.384 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 16352 PacketCount: 3

Sep 16 05:34:30.384 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 16368 PacketCount: 2914686

Sep 16 05:34:30.384 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 16400 PacketCount: 116690

Sep 16 05:34:30.384 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 16480 PacketCount: 2427623

Sep 16 05:34:30.384 PDT: %C4K_HWACLMAN-4-WARNINGSTRING: Entry: 32752 PacketCount: 3378424

Sep 16 05:34:30.484 PDT: %C4K_PKTPROCESSING-4-ERRORPACKET: Warning - Unexpected packet hitting output

acl

pdd = 0x9A02A160, 0x0FF80065

101 bytes: 00 00 0C 07 AC 01 00 19 B9 13 37 09 08 00 45 00

00 53 1E 78 00 00 80 11 2E 11 AC 11 15 A9 AC 10

80 46 D4 47 00 35 00 3F C4 62 0E FB 0

3 REPLIES
Cisco Employee

Re: Log messages on a 4500 switch L3

Hi,

What software do you run now ?

This message is an attempt to detect corrupted entry, but never worked really well. This message was removed in 12.2(37)SG.

There is good chance you can ignore this issue , unless this message is coming all the time you can ignore it or upgrade to a software after 12.2(37)SG to get rid of it.

Roland

New Member

Re: Log messages on a 4500 switch L3

Roland you are going to love this.

Version 12.2(31)SGA7

Purple

Re: Log messages on a 4500 switch L3

Time to upgrade !!!

277
Views
0
Helpful
3
Replies
CreatePlease to create content