Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Logging On Syslog

Hello Friends

I have a question, is there any way to configure (logging or snmp on) the router so it can send all the typed cmd to syslog sever?

Regards

Sabby                  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Logging On Syslog

Hi Sarbjit,

There is a way to do that using the EEM script. A very good example can be seen in Ivan Pepelnyak blog:

http://blog.ioshints.info/2006/11/cli-command-logging-without-tacacs.html

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards, Ivan Shirshin **Please grade this post if you find it useful.
5 REPLIES
Cisco Employee

Logging On Syslog

Hi Sarbjit,

There is a way to do that using the EEM script. A very good example can be seen in Ivan Pepelnyak blog:

http://blog.ioshints.info/2006/11/cli-command-logging-without-tacacs.html

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards, Ivan Shirshin **Please grade this post if you find it useful.
VIP Purple

Re: Logging On Syslog

HI Sarbjit,

Yes you can .

Check out this web and attached document.

http://www.2000trainers.com/ccda-study-guide/snmp-configuration/

Regards

please rate if it helps.

New Member

Re: Logging On Syslog

Thanks friends

Sent from Cisco Technical Support iPhone App

New Member

Logging On Syslog

Hi,

For syslog server, another easy way is some third party softwares also is there like... kiwi syslog server.........

Thanks & Regards, Srinivas. N.
VIP Purple

Logging On Syslog

Hi Sarbjit,

If you are satisfied with these above  answers then please mark this question as answered, It can be it helpful for others.

Regards

please rate if it helps.

298
Views
10
Helpful
5
Replies