Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

login issue in telnet


Can anyone help on this . Actually i have configured a 2960. In line vty 0 4 we cinfugured transport input ssh. But it is login in telnet also.What was mistake i have done. Can anyone rectify this... I need to login in SSH only.

Below is the configuration

line con 0

exec-timeout 30 0

password 7 1311121103200B292A286C303A0F435E

login local


line vty 0 4

access-class 1 in

no exec-banner

exec-timeout 0 0

timeout login response 300

logging synchronous

login local


transport input ssh

line vty 5 15

no login

Thanks in advance

Cisco Employee

Re: login issue in telnet

Can you post the output of show version?



New Member

Re: login issue in telnet


pls find the output below

Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(44)SE6, REL


Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Mon 09-Mar-09 18:10 by gereddy

Image text-base: 0x00003000, data-base: 0x01100000

ROM: Bootstrap program is C2960 boot loader

BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE6, RELEASE SOFTWARE


uptime is 6 weeks, 3 days, 14 hours, 0 minutes

System returned to ROM by power-on

System restarted at 15:57:37 Th Tue Sep 15 2009

System image file is "flash:c2960-lanbasek9-mz.122-44.SE6/c2960-lanbasek9-mz.122


This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco WS-C2960G-24TC-L (PowerPC405) processor (revision F0) with 61440K/4088K by

tes of memory.

Processor board ID FOC1330X0DV

Last reset from power-on

3 Virtual Ethernet interfaces

24 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:26:98:E8:C5:00

Motherboard assembly number : 73-10015-07

Power supply part number : 341-0098-02

Motherboard serial number : FOC13301624

Power supply serial number : AZS132503ED

Model revision number : F0

Motherboard revision number : A0

Model number : WS-C2960G-24TC-L

System serial number : FOC1330XOVD

Top Assembly Part Number : 800-26673-04

Top Assembly Revision Number : C0

Version ID : V04

CLEI Code Number : COMFX00BRA

Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 24 WS-C2960G-24TC-L 12.2(44)SE6 C2960-LANBASEK9-M

Configuration register is 0xF


Cisco Employee

Re: login issue in telnet

Can you try to put transport preferred none in line vty 0 4 and try again?

Also, can you post the output of sh crypto key mypubkey rsa?



New Member

Re: login issue in telnet


Please find the output

sh crypto key mypubkey rsa

% Key pair was generated at: 06:52:05 Th Sep 24 2009

Key name:

Storage Device: not specified

Usage: General Purpose Key

Key is not exportable.

Key Data:

30819F30 0D06092A 864886F7 0D010101 05000381 8D003081 89028181 00B33E15

89EDA4B1 05A82D97 FCF6C8BF F91DC7CC F9CDF4B5 EAE0DDB6 6D4D30EB 7E5FA581

36B53F52 29FA3B9C 67F2F5A0 CF43EBEE B778BD4A E118B8B3 5D2681AC 406AA9BD

C222951E A17DA8D6 3300CA57 04BFB6CE 7DB15882 5FEABAE4 A595708F C623D065

0847085E F18FBEF9 2BDF60F9 059B2634 C50CBBAB DB6D52A6 D7D5BBCC D3020301 000

% Key pair was generated at: 06:14:20 Th Oct 31 2009

Key name:

Temporary key

Usage: Encryption Key

Key is not exportable.

Key Data:

307C300D 06092A86 4886F70D 01010105 00036B00 30680261 00CD2311 72D25C39

0EA491A4 D21A8F1B C305116A 4C9035A8 DE9BEB6B EA89A44E F4446DEC 530787D1

6A2C627C 2335561B D7041060 81B4C6BC 9CDE6AFC 34FCC472 EF18C81B 8F2B5251

5F01F73D 014CCD5E 36CB60E2 0A1CCF0B FF1C6F10 E9B1C574 41020301 0001

Cisco Employee

Re: login issue in telnet

The crypto key looks fine. Have you tried to put transport preferred none in line vty 0 4 and test telnet?