12-05-2013 06:42 AM - edited 03-07-2019 04:56 PM
Hello,
I'm trying to get the login local command to work on the console port.
I have added:
username admin secret admin priv 15
enable secret 12345
line con 0
login local
I now get presented with a username and password option but it doesn't accept my local database username and password?
What am I doing wrong?
Thanks
12-05-2013 06:47 AM
Is aaa configured? If so, I don't believe login local will work any longer. You'll need "login authentication default" or whatever you named your local authentication name.
**** Edit *****
I stand corrected....I tested this, and it works fine even with aaa configured.
HTH,
John
*** Please rate all useful posts ***
12-05-2013 06:56 AM
The problem is in your username line.
It should be:
username admin priv 15 secre xxxxx
HTH,
John
*** Please rate all useful posts ***
12-05-2013 07:43 AM
Agree with john .
You entered the wrong command for credentials.
Please use like this :
Username admin priv 15 secret admin
Regards
Sent from Cisco Technical Support iPhone App
12-05-2013 07:47 AM
Thanks guys, what is wrong with my head today, that works, why did I do it the other way. It let me do it, what does the command I typed do then?
12-05-2013 07:52 AM
HI Andy,
config t
username admin priv 15 secret admin
Regards
Dont forget to rate helpful posts and mark this question as answered.
12-06-2013 05:42 AM
I believe that the way you typed the command makes priv 15 into part of the password.
HTH
Rick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: