Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Looking for 10G switch with stack function

Hi,

I am looking for a switch that has one 10G uplink port (more are not needed)and the others can be 1Gig ethernet ports.

It should support stacking too.

I found this one but I don't know if it is stackable.

Cisco Catalyst 3560E-12SD

12 SFP Gigabit Ethernet ports and 2 X2 10 Gigabit Ethernet ports

4 REPLIES

Re: Looking for 10G switch with stack function

Smail,

The Catalyst 3750-E switches support stacking through Cisco StackWise Plus technology. The Catalyst 3560-E switches do not support switch stacking. Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.

Please check out this link.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_50_se/release/notes/OL18262.html#wp956244

HTH,

Toshi

New Member

Re: Looking for 10G switch with stack function

Super Bronze

Re: Looking for 10G switch with stack function

The 3750E series supports 10 gig module ports and can be stacked. (See http://www.cisco.com/en/US/products/ps7077/index.html)

There used to be a 3750 switch that provided one 10 gig port, but it has been discontinued. The 3750E and 3750 series can be mixed within the same stack. (See http://www.cisco.com/en/US/products/hw/switches/ps5023/index.html)

Hall of Fame Super Gold

Re: Looking for 10G switch with stack function

Errr ... If you want to "stack", then follow the instructions/recommendations from the previous 2 post.

There's another method: Cluster (A cluster is a group of connected switches that are managed as a single entity. The switches can be in the same location, or they can be distributed across a contiguous Layer 2 network. All communication with cluster switches is through one IP address.)

Creating and Managing Clusters

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_xu/scg/kiclust.html

The command may be for the 3500 but it's still available for use.

1088
Views
0
Helpful
4
Replies
CreatePlease to create content