Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

loss of startup configuration with routers

Hello ;

Our clients claims the problem of loss startup configuration with power outage especially with 877 series , all the router are configured to store configuration in NVRAM ( confreg = 0x2101),  is there any solution to by pass this issue.

Everyone's tags (4)
5 REPLIES

Re: loss of startup configuration with routers

Hi,

Can you set it to 0x2102 and do a write mem?

Router(config)#config-register 0x2102

Sent from Cisco Technical Support iPhone App

New Member

Re: loss of startup configuration with routers

Hi

sorry I wa wrong the confreg is not 0x2101 but  0x2102 , but even the register is well configured I have the problem of loss configuration with many clients.

loss of startup configuration with routers

When the routers came back up were they in ROMMON mode or did they come up with the factory default config asking if you wanted to configure with the wizard?

Mike

New Member

loss of startup configuration with routers

I will check it and give you answer soon

Thanks.

Purple

Re: loss of startup configuration with routers

If using 0x2102 then make sure it has a correct boot statement pointing to the used image. 

310
Views
0
Helpful
5
Replies