Lots or Retrans on access layer 2 from distrubtion layer 3
We are currently using 3750's (non-E series)in the distribution layer 3 going to the access layer 2. We have noticed a lot of retrans issue on the access layer 2, 3750's, but no retrans in the same IP address range on the distribution layer 3, 3750's. The link between access and distribution are redundant dot1q trunks meshed. The issue still happens without the redundant meshed environment. Currently at 12.1(19). Has anyone else experienced this retrans issue and what was done to solve it.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...