cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1416
Views
0
Helpful
1
Replies

LSA origination prevented by existing LSA with same LSID but a different mask

samarjitdas
Level 1
Level 1

Hi

How to find out the duplicate entry with different subnet mask:

%OSPF-4-CONFLICTING_LSAID: LSA origination prevented by existing LSA with same LSID but a different mask, Existing Type 171115136 LSA: LSID 255.255.255.240 0xA330280 New Destination: 255.255.255.255 0x29200

1 Reply 1

nkarpysh
Cisco Employee
Cisco Employee

Hi Samarjit,

There is a cosmetic defect which is shifting variables in that error message:

CSCsm92436

Thus you see decimal value for ip address in Type, mask in LSID field, etc (all shifted left).

So for your message:

171115136 DEC = 0xA330280 HEX = 10.51.2.128  (if I decoded to benary correct  - pls double check ).

You can rate if was helpful.

Nik

HTH,
Niko
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card