Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mac address filter

how to deny specfic mac address to access specfic server on cisco switch 6509 hyprid IOS

2 REPLIES

Re: mac address filter

Hi ,

From 7.6, port Security has a feature that would do it,

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_6/confg_gd/

sec_port.htm#wp1022694

set cam filter

That will block ANY frame with that source address, that computer won't be able to get

into the network AT ALL. As soon as the switch receives a frame, it always checks it

against the CAM table, it will find that address marked as "filter", so it will discard

the frame.

Regards,

~JG

Silver

Re: mac address filter

You can anable port security on that interface.

set port security 2/1 enable

Console> (enable) set port security 2/1 enable 00-90-2b-03-34-08

Port 2/1 port security enabled with 00-90-2b-03-34-08 as the secure mac address

Trunking disabled for Port 2/1 due to Security Mode

Console> (enable)

Where 2/1 is the Server port.

You can see more in detail on below link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/configuration/guide/sec_port.html

Regards,

Dharmesh Purohit

143
Views
0
Helpful
2
Replies