Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mac adress binding

Hi All,

Anybody guide me to bind a mac address with ip on 6506.

  • LAN Switching and Routing
4 REPLIES

mac adress binding

Hi Prashant,

This is what called port-security.
See the below link how to configure and all.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/port_sec.html#wp1070356


Please rate the helpfull posts.
Regards,
Naidu.

New Member

mac adress binding

Hi

dhcp pool

   host 172.x.x.x 255.255.255.0

   client-identifier 0100.1708.48aa.f9

I have excuted the above command i am geeting the eeror

% A binding already exists for 172.x.x.x

Please suggest

New Member

Re: mac adress binding

Hi prashant

You need to clear the binding and check if the binding is manual or automatic.by command

switch#sh ip dhcp binding

if the binding is automatic then clear it by

switch# clear ip dhcp binding *   -----(star imples automatic binding)

have u created the parent pool? if so the parent pool will be in this format.

ip dhcp pool parentpool                        ------------------------------this is a prent pool----------------------------------

  netweork 10.10.30.0 255.255.255.0

  default-router 10.10.155.1

   dns-server ip?

-------------------------below is a child pool under pareent pool for binding a mac-id of an host to an ip -------------------

ip dhcp pool arun                                

   host 10.10.30.13 255.255.255.0

   client-identifier 01c0.cb38.1592.72

   client-name arun                                           

Hope this will be helpful, if u looking for this. If any queries please update will be looking at ur posts.

regards

srikanth

mac adress binding

clear ip dhcp binding 172.x.x.x and try to configure once more.

5006
Views
0
Helpful
4
Replies
This widget could not be displayed.