Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

MAC Based Security

I'd like to set up multiple workstations (Certain ones) to connect to particular switch ports. Can someone point me to some Documentation on how to set up a Pool using MAC Based Security?

The switch is a Cisco 3548XL

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: MAC Based Security

That's for a 3550.

To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc6/scg/swports.html#wp1075712

3 REPLIES
New Member

Re: MAC Based Security

Bronze

Re: MAC Based Security

That's for a 3550.

To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc6/scg/swports.html#wp1075712

New Member

Re: MAC Based Security

VERY HELPFUL THANK YOU VERY MUCH!!!

113
Views
3
Helpful
3
Replies
CreatePlease to create content