Macro: Enable FastEthernet 1/0/1-10 if FastEthernet 1/0/48 is going down
I would like to know, if it is possible to set the interface range FastEthernet 1/0/1-10 to "no shutdown" via marco, if Interface FastEthernet 1/0/48 changes state to down (e.g. Networkcable unplugged).
If it ist possilbe could you provide the macro here?
Macro: Enable FastEthernet 1/0/1-10 if FastEthernet 1/0/48 is go
You absoultely can script items like this with Cisco devices - they are standard telnet/SSH. However you have to take a few things into consideration.
1. The device is a switching/routing operating system, meaning it has limited adminsitrative tools; in your case, there is no way on the device to have it recognize if an interface went down and to executive a script.
2. What you're wanting to accomplish can easily be handled by some SNMP monitoring software and having that software run a script which logs into the device, and issues the appropriate commands.
The key to accomplishing what you want to do is the fact that it cannot be handled internally, but my be handled by a third-party device.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.